Winco-mfg 5111 - Activity Chair User Manual download pdf

Page 1 of 4

006085 Rev L Date 11-08-11 JWC

1. READ AND FOLLOW ALL DIRECTIONS.

2. NEVER use tray as a restraint.

3. ALWAYS fold footplate up before user enters or exits the chair; otherwise INJURY MAY RESULT.

4. DO NOT stand on plastic footplate; INJURY MAY RESULT.

5. Keep users hands and feet clear of any moving parts. Attendant MUST confirm that users hands and feet are clear

of moving parts when adjusting positions on tray or footrest or INJURY MAY RESULT.

6. Never use the chair arms or tray as a seat; INJURY MAY OCCUR.

7. Lock casters at all times, except when transporting chair.

8. Chair must ALWAYS be positioned on a level surface.

9. DO NOT use chair for Transporting in or with ANY type of vehicle or trailer. Winco chairs have not been tested or

approved for use by an occupant in any type of vehicle or trailer.

10. Immediately remove from service; Any chair with broken parts, torn upholstery, or other mechanical or visible

damage.

11. Periodically, recheck tightness of all nuts, bolts and screws.

12. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.

13. NEVER EXCEED the recommended weight capacity of 275 lbs. (124.7 kg).

14. SAVE THESE INSTRUCTIONS for future reference and training.

5101-5111

Golden Years Chair

CUSTOMER INSTRUCTIONS

Tools needed:

 Slot-head screwdriver OR, 5/16” wrench (multiple size wrench included)

 Scissors or box cutter to aid in removal of packing material

 Always start hardware together by hand first - Use of powered tools not recommended

Install the Back:

1. After checking your product for any shipping damage, chair needs to be positioned upright on level surface.

Remove all packing material and hardware that was secured for shipping. Cut tape and plastic with

scissors, being careful not to damage upholstery.

2. Use a standard slot-head screwdriver or 5/16” wrench; Remove the (2) screws that have been pre-installed

in the Seat Frame Rails. DO NOT discard screws.

3. To ease assembly, spray the Seat Frame Rail ends with WD-40 (or similar lubricant approved by your

facility).

5101-5111 Weight Capacity = 275 lbs. (124.7 kg.)

PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377

before attempting to use this product; otherwise injury may occur.

PLEASE READ AND FAMILIARIZE YOURSELF WITH

LL INSTRUCTIO

S BEFORE PROCEEDING WITH ASSEMBLY

Winco assumes no responsibility for damage or injury caused by improper assembly,

installation, use, or maintenance of these products.

1 2 3 4

Summary of Contents

Page 1 - 5101-5111

Page 1 of 4 006085 Rev L Date 11-08-11 JWC 1. READ AND FOLLOW ALL DIRECTIONS. 2. NEVER use tray as a restraint. 3. ALWAYS fold footplate up

Page 2

Page 2 of 4 006085 Rev L Date 11-08-11 JWC 4. Slip the Back Frame over the Seat Frame Rail ends until the holes in Back Frame line up with the hol

Page 3 - Page 3 of 4

Page 3 of 4 006085 Rev L Date 11-08-11 JWC Other Quality Winco Medical Furnishings You May Be Interested In: Visit us online at www.wincomfg

Page 4 - Page 4 of 4

Page 4 of 4 006085 Rev L Date 11-08-11 JWC

Comments to this Manuals

No comments

Winco-mfg 5111 - Activity Chair User Manual

Browse online or download User Manual for Furniture Winco-mfg 5111 - Activity Chair. Winco Mfg. 5111 - Activity Chair User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Furniture Winco-mfg 5111 - Activity Chair