Winco-mfg 5560 - Comfort Care Premier Recliner User Manual

Browse online or download User Manual for Furniture Winco-mfg 5560 - Comfort Care Premier Recliner. Winco Mfg. 5560 - Comfort Care Premier Recliner User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Page 1 of 3
006110 Revision N Date 01-28-11 JWC
1. READ AND FOLLOW ALL DIRECTIONS.
2. NEVER use side table as a seat.
3. DO NOT put hands, feet or clothing into any openings when changing positions on recliner. Attendant MUST
confirm that users hands and feet are safe while changing recliner positions or INJURY MAY RESULT.
4. Stay clear of the recline mechanisms.
5. Periodically, recheck tightness of all nuts, bolts and screws.
6. NEVER use the trays or chair arms or backrest or legrest as a seat; SERIOUS INJURY MAY OCCUR.
7. Chair MUST be in full upright position with casters locked when a patient enters or exits chair.
8. NEVER allow a patient to exit a reclined chair with position-lock engaged or SERIOUS INJURY MAY RESULT.
9. Lock casters at all times, except when transporting chair.
10. Chair must ALWAYS be positioned on a level surface.
11. DO NOT use recliner for Transporting in or with ANY type of vehicle or trailer. Winco recliners have not been
tested or approved for use by an occupant in any type of vehicle or trailer.
12. Immediately remove from service; Any recliner with broken recline mechanisms, torn upholstery, or other
mechanical or visible damage.
13. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
14. NEVER EXCEED the recommended weight capacity of 275 lbs. (124.7 kg).
15. SAVE THESE INSTRUCTIONS for future reference and training.
5560
Comfort Care, Premier Recliner
CUSTOMER INSTRUCTIONS
NO TOOLS REQUIRED FOR ASSEMBLY!
Install the Back:
1. After checking your product for any shipping damage, chair needs to be positioned upright on level surface.
Remove all packing material and hardware that was secured for shipping. Remove tape and plastic. If using
scissors or knife, please be careful not to damage upholstery.
2. Make sure footrest is in closed postion & LOCK ALL CASTERS before installing chair back.
3. Remove the (2) Bow Tie Cotter Pins and the (2) Clevis Pins from the lower Back Frame Forks. DO NOT
LOOSE THESE PARTS, YOU WILL NEED THEM AGAIN!
4. Using a second person to help; Position the Back Frame Forks over the Seat Frame and align holes
.
HINT: If you do not have a helper; Rest the bottom of the Upholstered Back on the rear portion of the Upholstered
Seat and push the Back Assembly slightly forward to help steady the chair back.
5. Use (1) one of the Clevis Pins (with tapered end) and insert it THROUGH the inside of Back Frame Fork
,
THROUGH hole in Seat Rail Tube
and; THROUGH outside of Back Frame Fork.
REPEAT FOR OPPOSITE SIDE OF CHAIR. (see pg.2 detail of pin install photo)
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377
before attempting to use this product; otherwise injury may occur.
5560 Weight Capacity = 275 lbs. (124.7 kg)
PLEASE READ AND FAMILIARIZE YOURSELF WITH
A
LL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY
Winco assumes no responsibility for damage or injury caused by the improper assembly, installation
or use of these products; or during assembly or maintenance of these products.
Page view 0
1 2 3

Summary of Contents

Page 1 - CUSTOMER INSTRUCTIONS

Page 1 of 3 006110 Revision N Date 01-28-11 JWC 1. READ AND FOLLOW ALL DIRECTIONS. 2. NEVER use side table as a seat. 3. DO NOT put hands, f

Page 2

Page 2 of 3 006110 Revision N Date 01-28-11 JWC 6. Insert (2) two Bow Tie Cotter Pins, into the small holes on ends of the (2) two Clevis Pins y

Page 3

Page 3 of 3 006110 Revision N Date 01-28-11 JWC Visit our website www.wincomfg.com/product-documents/parts-lists for a complete parts list catalog

Comments to this Manuals

No comments