Winco-mfg 8050/8050SH - Adjustable Treatment Table User Manual download pdf

Page 1 of 4

006045 Rev FF Date 06-05-12 JWC

1. READ AND FOLLOW ALL DIRECTIONS.

2. NEVER stand on table or INJURY MAY OCCUR.

3. NEVER allow user to sleep unattended on table or INJURY MAY OCCUR.

4. NEVER leave an unconscious user unattended on table or INJURY MAY OCCUR.

5. DO NOT use table for transporting user in or with ANY type of vehicle or trailer. Winco tables have not been tested

or approved for use by an occupant in any type of vehicle or trailer.

6. NEVER leave an infant or child unattended on table or INJURY MAY OCCUR.

7. DO NOT allow children to play on or with the table or INJURY MAY OCCUR.

8. MAKE SURE Headrest Adjustment Notched Bar is fully engaged before user lays on table.

9. DO NOT put hands, feet or clothing into any openings when changing positions on table. Attendant MUST confirm

that users hands and feet are safe while changing table positions or INJURY MAY RESULT.

10. Periodically, recheck tightness of all nuts, bolts and screws.

11. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.

12. NEVER EXCEED the recommended weight capacity of 400 lbs. (181.4 kg).

13. SAVE THESE INSTRUCTIONS for future reference and training.

8050 Adjusting Table

with Adjustable Facerest / Armrest

CUSTOMER INSTRUCTIONS

Tools needed:

 Phillips-head screwdriver

 Two (2) 7/16” wrenches (multiple size wrenches included)

 Scissors or box cutter

 Cardboard shipping container (stays under table during assembly to protect upholstery)

 - If using powered tools always start hardware together by hand first -

SEE “Parts Reference” (pg. 3) for visual reference during assembly.

1. After checking your product for any shipping damage, table needs to be positioned upside-down on cardboard

or protective surface. Remove all packing material and hardware that was secured for shipping. Cut tape on

corners of box so that cardboard will lay flat while you assemble table.

Arm Frame Assembly

2. Using two (2) 7/16” wrenches; assemble the two Arm Frame Standoffs to the Arm Frame Support using (2)

¼-20 x 1-¾” bolts and locknuts. See picture below.

PLEASE READ AND FAMILIARIZE YOURSELF WITH

LL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY

PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377

before attempting to use this product; otherwise injury may occur.

8050 Weight Capacity = 400 lbs. (181.4 kg.)

Winco assumes no responsibility for damage or injury caused by improper assembly,

installation, use, or maintenance of these products.

1 2 3 4

Summary of Contents

Page 1 - 8050 Adjusting Table

Page 1 of 4 006045 Rev FF Date 06-05-12 JWC 1. READ AND FOLLOW ALL DIRECTIONS. 2. NEVER stand on table or INJURY MAY OCCUR. 3. NEVER allow user

Page 2 - Ratchet Bar

Page 2 of 4 006045 Rev FF Date 06-05-12 JWC Table Components Installation 3. Position the table upside-down on the cardboard shipping container or

Page 3 - Parts Reference

Page 3 of 4 006045 Rev FF Date 06-05-12 JWC Optional Shelf Installation 14. If your table has a shelf, double-sided tape has been installed on th

Page 4 - Page 4 of 4

Page 4 of 4 006045 Rev FF Date 06-05-12 JWC Visit our website www.wincomfg.com/product-documents/parts-lists for a complete parts list of your tabl

Comments to this Manuals

No comments

Winco-mfg 8050/8050SH - Adjustable Treatment Table User Manual

Browse online or download User Manual for Furniture Winco-mfg 8050/8050SH - Adjustable Treatment Table. Winco Mfg. 8050/8050SH - Adjustable Treatment Table User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Furniture Winco-mfg 8050/8050SH - Adjustable Treatment Table